Raise-Lower System - MULTIQUIP Diamond Back SP303516 Street Pro Operation And Parts Manual

Raise-Lower System

This saw uses a 12-volt hydraulic pump and cylinder to power the raise-lower system.
 Level the frame prior to service to get accurate readings.
 Check oil level daily.
 Fill the reservoir half full when cold.
 Use 5W-30 premium grade engine oil.
Hydraulic
Manifold
Raise-Lower
Cylinder
MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 53
MQ SP-3035 CONCRETE SAW
Fig. 40 — Raise-Lower System
Raise-Lower
Pump
Raise-Lower
Reservoir