Table of Contents
Advertisement
Hydraulic System Maintenance
The hydraulic system consists of:
§ Blade Shaft
§ Transaxle
§ Depth Stop Cylinder & Valve
§ Lift Cylinder
Routine Maintenance
Check oil level daily.
Level the saw frame prior to service to get an accurate reading.
Fill reservoir to Fill line when cold, with 5W-30 premium grade engine oil.
Change oil and filter annually.
Depth Stop Cylinder
Lift Cylinder
Oil Filter
Fuel Filter
60
§ Hydraulic Pump
§ Hydraulic Manifold
§ Hydraulic Filter
§ Oil Fill/ System Vent
Fig. 43 — Oil Reservoir Fill Line
Oil Fill/System
Vent
Fig. 44 — The Hydraulic System
Oil Cooler
Assembly
Hydraulic Pump
Transaxle
Hydraulic
Manifold
Blade Shaft
Advertisement
Table of Contents
