Handlebars; Mq Sp-3035 Concrete Saw - MULTIQUIP Diamond Back SP303516 Street Pro Operation And Parts Manual

Sp3 “street pro” professional slab saw 35 hp wisconsin diesel engine

Table of Contents

Handlebars

The handlebars are adjustable to three different angles, for optimum operator control, and can

also be slid fully inward for storage. Once handlebars are adjusted, lock them into position by

tightening the lock knob on each side.

Using the handlebars in position #2 or #3, when employing larger diameter blades reduces the

need to bend over and the effort required by the operator to maneuver the unit.



Using the handlebars in position #2 or #3 when employing larger

diameter blades, reduces the need to bend over, and reduces the effort

required by the operator to maneuver the saw.

NOTE

MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 27

Fig. 13 — Handlebar Positions

Lock Knob

P 3

P 2

P 1

Three

operating

positions

Storage

position

Table of Contents