Fan Power Connectors: CPUFAN1, SYSFAN1~4
The fan power connectors support system coolng fan wth +12V. When connectng the
wre to the connectors, always note that the red wre s the postve and should be con-
nected to the +12V; the black wre s Ground and should be connected to GND. If the
manboard has a System Hardware Montor chpset on-board, you must use a specally
desgned fan wth speed sensor to take advantage of the CPU fan control.
CPUFAN1
SYSFAN1~2
Important
•
Please refer to the recommended CPU fans at processor's offical webste or consult
the vendors for proper CPU coolng fan.
CPUFAN1, SYSFAN1, SYSFAN2 support fan control. You can nstall Control Center
•
utlty that wll automatcally control the fans speed accordng to the actual tempera-
ture.
•
Fan cooler set wth 3 or 4 pns power connector are both avalable for CPUFAN1,
SYSFAN1, SYSFAN2.
Front Panel Audo Connector: JAUD1
Ths connector allows you to connect the front panel audo and s complant wth Intel
Front Panel I/O Connectvty Desgn Gude.
SYSFAN3~4
®
En-15