Screw Holes - MSI 990XA-GD55 series User Manual

Screw Holes

When you nstall the manboard, you have to place the manboard nto the chasss n the
correct drecton. The locatons of screws holes on the manboard are shown as below.
The sde has to toward
the rear, the poston
for the I/O sheld of the
chasss.
Refer above pcture to nstall standoffs n the approprate locatons on chasss and then
screw through the manboard screw holes nto the standoffs.
Important
• To prevent damage to the manboard, any contact between the manboard crcut and
chasss or unnecessary standoffs mounted on the chasss s prohbted.
• Please make sure there s no metal components placed on the manboard or wthn
the chasss that may cause short crcut of the manboard.
Screw holes
En-5