Troubleshooting - Omron HEM-7080 Instruction Manual

HEM-7080-C1_B_M.fm Page 40 Tuesday, March 9, 2010 9:05 AM
5. Handling Errors and Problems
5.2

Troubleshooting

Problem
No display
appears when
the START/
STOP button is
pressed.
Cannot measure
or readings are
too high.
The blood
pressure is
different each
time. The
reading is
extremely low
(or high).
40
Cause
The batteries are empty.
Is the cuff wrapped
correctly around the
arm?
The cuff pressure does
not rise although the
pump motor can be
heard.
Blood pressure readings constantly vary with time of
measurement and nervous condition. Take deep
breaths to relax before taking a measurement.
Remedy
Replace the batteries.
Attach the arm cuff
correctly.
Check that the air plug is
properly connected to
the unit. Push the air
plug firmly into the air
jack.