Installation Of Indoor Unit - Toshiba RAV-SM562MUT-E Installation Manual

3

INSTALLATION OF INDOOR UNIT

The installation of the air conditioning unit must be positioned in a location that can sufficiently support its weight
and give protection against adverse environmental conditions.
Failure to do so may result in unit damage and possible human injury.
Any incomplete installation may also cause possible risk of human injury.
• Unpack the package, take out the product and then place it on the floor so that the same surface directs
underneath as it is placed in the package.
• Never put the products taken out from the packing box in a pile, or put other load on them; otherwise there is a
possibility to damage electric parts, fan parts, draining mechanism, and etc.
If the both sides are turned over, a deformation of mounting metal of the ceiling panel which is sold separately,
etc. may be caused. Accordingly the product may be damaged and the installation becomes impossible in
some cases.
Strictly comply to the following rules to prevent damage of the indoor units and human injury.
• Do not place heavy objects on the indoor unit. (Even when units are still packaged)
• Always carry the unit as packaged from the factory wherever possible.
If carrying in the indoor unit unpacked by necessity, be sure to use buffering cloth, etc. to prevent damaging
the unit.
• To move the indoor unit, hold the hanging brackets (4 positions) only.
Do not apply force to other parts (refrigerant pipe, drain pan, foamed parts, or resin parts etc.).
• To be carried by two or more persons. Do not strap the unit in positions other than that stated.
WARNING
OK NO GOOD
REQUIREMENT
6