I Mounting The Transceiver; I Optional Ut-111 Installation - Icom IC-F1721 Instruction Manual

I Mounting the transceiver

The universal mounting bracket supplied with your transceiv-
er allows overhead mounting.
• Mount the transceiver securely with the 4 supplied screws
to a thick surface which can support more than 1.5 kg.
Flat washer
Spring washer
When using
self-tapping screws
CONNECTION AND MAINTENANCE

I Optional UT-111 installation

Install the optional UT-111 unit as follows:
q Turn the power OFF, then disconnect the DC power cable.
w Unscrew the 4 cover screws, then remove the bottom
cover.
e Cut the pattern on the PCB at the CP57, then solder CP58
as shown below.
r Install the unit as shown in the diagram below.
t Replace the bottom cover and screws, then re-connect the
DC power cable.
r
CP57
See p. 28 when unin-
stalling the unit.
e
CP58
4
4
27