Radio Operation - Jensen VM8013HD Installation And Operation Manual

RADIO OPERATION

About HD Radio™ Technology
HD Radio technology allows CD-quality digital broadcasting of your local
AM and FM radio stations. HD Radio broadcasts can include multiple
channels on the same frequency, which is called multicasting. With
multicasting, you can receive up to eight additional multicast channels:
HD1~HD8.
With your VM8013HD radio, you will receive HD Radio digital broadcasts
automatically when tuned to a station that offers HD Radio technology.
NOTE: Not all FM or AM stations offer HD Radio (digital) broadcasting.
You can receive both analog and digital stations with the VM8013HD.
Accessing Radio Mode
Press the SRC button (6) on the front panel or remote control (14) to switch
to the RADIO source.
1 3
7
FM1 P1 87.50 MHz
Radio
AUTO
P1 87.50MHz
P2 90.10MHz
PS: SO SMALL
5
1. Auto, Analog, Digital Reception Indicator
2. Radio Station Frequency
3. AM/FM Band
4. Time/Clock
5. Program Information: Artist, Title, Type
NOTE: The amount of information displayed when receiving an HD
Radio signal is dependent upon what is being broadcast. Some stations
broadcast their call letters (name), the artist's name, song title, and
category of music.
2
8 4
01:02
AM
HD
6
12
6. Current Preset Channels
7. Source Indicator
8. HD Radio Station Indicator
1 2
CH/
DISP
CAT
DIM
SRC PGM
BAND
iPod Menu
Selecting the AM/FM Band
Press the BAND button (3) to change between the AM and FM band.
Tuning
Seek Tuning
Press the TUNE/TRACK >>| or |<< buttons (17) to seek the next/previous
station automatically.
Manual Tuning
Press and hold the TUNE/TRACK >>| or |<< buttons (17) to enter Manual
tuning mode. Press the buttons again to move the radio frequency number
up or down one step.
HD Radio Multicast Channels
To tune to an HD Radio multicast channel, tune to the main signal and then
press the PGM button (14) on the control panel. A list of multicast channels
will be displayed (HD-1, HD-2 etc).
• Use the rotary encoder to navigate the list and then press to select a
multicast channel.
• Use the remote control arrow keys and ENTER button to select a
multicast channel.
Press and hold the PGM button to change between "Auto", "Digital" and
"Analog". When set to "AUTO", the station will first be received in Analog
but will change to Digital when a digital signal is detected and the HD icon
VM8013HD
VM8013HD
INT
1 2
RPT RDM
3 4
DN UP
5 6
18
A/V IN