Table of Contents
Advertisement
Notice VitaCuisine_GB_NC00013664:TEAL369_NoticeVitacuisine_GB
Instructions for Use
Before first use
• Clean the water tank using a damp, non-abrasive sponge -
fig. 1
.
• Wash all removable parts using warm water and washing up
liquid, rinse and dry.
Do not use seasoning, herbs or
any liquid other than water in
the water tank. Ensure that the
water tank (8) is filled with
water to the maximum level
before using the steamer.
Cooking
Choose the cooking time
• Plug the steamer in and switch on: a beep sounds and
fig. 6
displayed -
• If no other action is taken, the screen goes blank and the
steamer switches to standby mode after 2 minutes
• Set the cooking time using the + and – touchpads (max.
fig. 7
60 min)
-
• 5 sec. later (or on a short press of the on/off touchpad) steam
cooking begins. The « vitamin + » touchpad lights up and the
cooking symbol
• You can alter the cooking time at any point after cooking has
started by pressing the + or – touchpad -
• During cooking, the time displayed reduces by minutes and
then by seconds in the last minute.
After a few minutes cooking,
you can manually stop the
« vitamin + » programme by
pressing the illuminated
fig. 9
touchpad
-
.
4
• Pour cold water directly into the water tank up to the
maximum level (1.5 litre) -
• Position the juice collector on the water tank -
• Place the removable base (4) in basket 1 and the cooking
trays in baskets 2 and 3, if required -
• Put baskets 1, 2 and 3 with their bases in position and then
the lid -
• Use fresh water with each use and check that the water tank
is filled to the maximum level.
.
.
fig. 8
is displayed -
.
fig. 7.
Using the « vitamin + » touchpad
• Your steamer is fitted with a « vitamin + » touchpad which
reduces cooking time and preserves the full vitamin content.
• The touchpad lights up when cooking starts. This allows a faster
start to the cooking process owing to a higher steam output.
• The « vitamin + » touchpad light goes out automatically when
the quantity of steam is sufficient for the cooking process.
• If the « vitamin + » touchpad is not illuminated and you
intervene during the cooking process (such as inserting a
basket, removing the lid to check the cooking progress, etc.),
press the « vitamin + » touchpad to replace the lost steam -
fig. 9
.
Do not immerse the power
supply base in water.
Fill the water tank
fig. 2
.
fig. 5.
A long press on the + or –
is
touchpad allows you to
increase or decrease the
cooking time more quickly.
.
20/10/09
fig. 3
.
fig. 4
.
1
Hide quick links:
Advertisement
Table of Contents
