Option Items - Samsung AQB18J6WC Service Manual

Alignment and Adjustments Operating Instructions and Installation
Step 3 : Upon completion of the selection, check you made right selections.
Whenever you press the
Step 4 : Pressing the ON/OFF button (
When pressing the operation ON/OFF key with the direction of remote control for unit, the sound "Ding" is heard and the
OPERATION LED lamp is flickering at the same time, then the input of option is completed. (If the "ding" sound isn't heard, try again
pressing the ON/OFF button.)
Step 5 : Unit operation test-run
First, Remove the battery from the remote control.
Second, Re-insert the battery into the remote control.
Third, Press ON/OFF (
• Error Mode
1 If all lamps of indoor unit are flickering, Plug out, plug in power plug again and press ON/OFF key to retry.
st
2 If the unit is not working properly or all lamps are continuously flickering after setting the option code, see if the
nd
correct option code is set up for its model.
OPTION ITEMS
REMOCON
SEG1
MODEL
AQV18JA 0
AQV24JA 0
3-6
button, the set Option will be displayed.
)
) key with the direction of remote control for set.
SEG2 SEG3 SEG4
A D 7
B E 7
SEG5 SEG6 SEG7
7 7 1
7 7 1
SEG8 SEG9 SEG10 SEG11 SEG12
7 F 2
7 F 2
Samsung Electronics
8 E
8 E