Step 7
Move the cursor onto the [B] (play) button, and then
press the [SET] button. (Or press the [PLAY] button on
the front panel.)
→ Playback of the selected recorded data (in which
motion was detected) will be displayed.
Note:
• When selected time and date is too close to the
current time and date, playback may sometimes
not start. In this case, wait for a while and try to
play again.
Step 8
To stop the playback, press the [STOP] button on the
front panel.
→ Playback will stop. Playback on monitor 2 will be
switched to live image display.
55