Table of Contents
Advertisement
Section 3 - Configuration
Select Dynamic IP (DHCP) from the drop-down menu to obtain IP Address information automatically from your ISP. Select
this option if your ISP does not give you any IP numbers to use. This option is commonly used for cable modem services such
as Comcast and Cox.
Host Name:
The Host Name is optional but may be required by some
ISPs. Leave blank if you are not sure.
Primary/
Enter the Primary and Secondary DNS server IP addresses
Secondary DNS
assigned by your ISP. These addresses are usually obtained
Server:
automatically from your ISP. Enter the value 0.0.0.0 if you
did not specifically receive these from your ISP.
MTU:
Maximum Transmission Unit - you may need to change
the MTU for optimal performance with your specific ISP.
1500 is the default MTU.
MAC Address:
The default MAC Address is set to the Internet port's
physical interface MAC address on the Broadband Router.
It is not recommended that you change the default MAC
address unless required by your ISP. You can use the Clone
Your PC's MAC Address button to replace the Internet
port's MAC address with the MAC address of your Ethernet
card.
Click the Save.Settings button to save any changes made.
D-Link DIR-815 User Manual
Dynamic IP (DHCP)
29
Advertisement
Table of Contents
