Table of Contents
Advertisement
Section 3 - Configuration
This page will allow you to change the Administrator password and configure the authentication settings. This window also
allows you to enable Remote Management, via the Internet.
Admin Password:
Enter a new password for the Administrator Login Name. The administrator
can make changes to the settings.
System Name:
Enter a name for your router.
Enable Graphical
Enables a challenge-response test to require users to type letters or
Authentication:
numbers from a distorted image displayed on the screen to prevent
online hackers and unauthorized users from gaining access to your
router's network settings.
Enable HTTPS
Check to enable HTTPS to connect to the router securely. This means to
Server:
connect to the router, you must enter https://192.168.0.1 (for example)
instead of http://192.168.0.1.
Enable Remote
Remote management allows the DIR-815 to be configured from the
Management:
Internet by a web browser. A username/password is still required to access
the Web Management interface.
Remote Admin Port:
The port number used to access the DIR-815 is used in the URL. Example:
http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-
815 and 8080 is the port used for the Web Management interface.
If you have enabled HTTPS.Server, you must enter https:// as part of the
URL to access the router remotely.
Remote Admin
This section will list any rules that are created. You may click the Edit icon
Inbound Filter:
to change the settings or enable/disable the rule, or click the Delete icon
to remove the rule. Details will display the current status.
Click the Save Settings button to save any changes made.
D-Link DIR-815 User Manual
Tools
Admin
88
Advertisement
Table of Contents
