Table of Contents
Advertisement
Section 2 - Installation
Important: for best results, insert the Installation CD and follow the on-screen instructions. If you are unable to use the CD or
are using Mac or Linux, please use the following installation steps:
1. Turn off and unplug your cable or DSL broadband modem. This is required.
2. Position your router close to your modem and a computer. Place the router in an open area of your intended
work area for better wireless coverage.
3. Unplug the Ethernet cable from your modem (or existing router if upgrading) that is connected to your computer.
Plug it into the blue port labeled 1 on the back of your router. The router is now connected to your computer.
D-Link DIR-815 User Manual
Manual Setup
Modem
DIR-815
4
3
2
1
INTERNET
POWER
12V
1A
RESET
Computer
10
Advertisement
Table of Contents
