Resume By Alarm; Wake Up On Lan; Restore On Ac Power Loss - MSI ATX BX1 User Manual

Resume by Alarm

This function is for setting date and time for your computer to boot
up. During Disabled, you cannot use this function. During Enabled, choose
the Date and Time Alarm:
Date(of month) Alarm
Time(hh:mm:ss) Alarm
Note: If you have change the setting, you must let the system boot up until
it goes to the operating system, before this function will work.

Wake Up On LAN

To use this function, you need a LAN add-on card which support
power on functions. It should also support the wake-up on LAN jumper
(JWOL1).
Enabled
Disabled
Restore on AC/Power Loss
The settings are power on or last status. During power on, after
every AC power loss, the system will be turned on. During last status, after
every AC power loss, whatever the system status, it will be the same when
the AC power returns.
Note: a. If you set this option to last status, jumper JP1 must be open or
this function will not work.
IRQ 8 Clock Event
You can Enable or Disable monitoring of IRQ 8 so it does not
awaken the system form suspend mode.
You can choose which month the
system will boot up. Set to 0, to boot
every month.
You can choose what hour, minute and
second the system will boot up.
Wake up on LAN supported.
Wake up on LAN not supported.
3-21
®