MSI ATX BX1 User Manual page 11

Step 5: Install the Heat Sink with Fan to the Processor.
Push down the metal clips, so that they are in line with the back of
the Heat Sink. Be careful, so as not detach the metal clips from the
Heat Sink.
Heat Sink w/ Fan
Heat Sink
Base Holder
In case the metal clips are detached from the Heat Sink, re-attach
them. Look for the arrow on the metal clip. This arrow should be
pointing down and aligned with the Heat Sink Support Base Holder.
Attach the Heat Sink to the processor.
Clip Holder
Secure
holes
S.E.C. Cartridge - Thermal P
Isometric View
®
Pentium II Processor (Back)
- Look at the back of the Heat Sink and take note of the 2 secure
posts. Insert these 2 Secure posts to the 2 secure holes on the
back of the processor.
- Align the ears of the metal clips with the clip holders on the back of
the processor. Use a screw driver to push the metal clips onto the
clip holders. Check for a perfect fit.
Metal Clips
Clip Holder
2-6
The arrow
should be
pointing
down.
Metal Clips Ear
Secure
Posts
Metal Clips Ear
Heat Sink w/ Fan(Back)