Ccd White Defect Compensation - Sony DSC-S75 Service Manual

14. CCD White Defect Compensation

Mode
Subject
Measurement Point
Measuring Instrument
Adjustment Page
Adjustment Address
Note 1: Check that the data of page: 6, address: 02 is "00".
If not, turn the power of unit OFF/ON.
Adjusting method:
Order Page Address Data
1 0 01 01
2
3 F DE
4 F DE 1E
5 F E3
6 F E3 0E
7 6 01 8B
8 6 02
9 6 55
10 6 01 00
11 F DE 0F
12 F E3 60
13 6 01 87
14 6 02
15 6 55
Note 2: The adjustment data will be automatically input to
page: 7, address: 88 to A3.
Processing after Completing Adjustment:
Order Page Address Data
1 6 01 00
2 F E3
3 F DE
4
5 0 01 00
CAMERA
Not required
Displayed data of page: 6,
address: 55
Adjusting remote commander
7
88 to A3
Procedure
Perform "Data setting during
camera system adjustments".
(Refer to page 5-14)
Note down the data.
Press PAUSE button.
Note down the data.
Press PAUSE button.
Press PAUSE button. (Note 2)
Check the data changes to "01".
Check the data.
00 to 7F: Normal
80 to FF: Defective
Press PAUSE button.
Press PAUSE button.
Press PAUSE button.
Press PAUSE button.
Check the data changes to "01".
Check the data changes to "00".
Procedure
Press PAUSE button.
Set the data noted down at
step 5, and press PAUSE
button.
Set the data noted down at
step 3, and press PAUSE
button.
Release the data setting
performed at step 2 . (Refer
to page 5-14)
5-26
Ver. 1.2 2001. 08