Maintenance; Storage - Mercury Owner's Manual

Tyres
The condition of the tyres depends on how you drive and use your scooter.
Please check the tread depth regularly.
Replace the tyres when the tread depth is less than 0.5mm
Attention
1. When tread depth is below 0.5mm it can easily lead to vehicle slippage, making braking
distances longer. Therefore replace the tyres as early as possible when they are found to have
insufficient tread depth.
2. The Prism scooter comes with solid tyres so there is no need to check tyre pressure.

7.4 MAINTENANCE

You must maintain the scooter frequently if you tend to drive on grass, sand, and gravel or in other adverse
environments.
Do not use, water, oil or other chemical solutions to clean your scooter. Be sure NOT to spray the scooter
with a hose or tap as this may cause damage to electronic componentry and the scooter controller.
Please take the scooter to authorised dealers for repairs and adjustments. Improper adjustments could lead to
an accident or scooter malfunction.
Please use a soft, wrung dry cloth to keep your scooter tidy and dust-free. Use natural or mild detergent to
clean the scooter.
Attention
When conducting maintenance of your vehicle, turn the power switch to OFF and remove the
charger cords
Suggestions
♦ Do not splash water directly to wash your scooter as this could lead to malfunction of the
system electrics.
♦ Do not use petrol, solvents or vaporizing solution as these may deform or damage the
shrouds.
♦ Do not use wax.

7.5 STORAGE

Ensure the scooter is stored under the following conditions:
Ensure the seat is set in the 'forward' position
Ensure the scooter is switched off
Ensure the charger is disconnected when not in use
Suggestion
Please store the scooter in an environment where it is out of direct sunlight or damp. When
storing for a long time, charge the battery to full power and then disconnect the battery terminal.
For more details contact to your dealer.
Mercury Prism Electric Scooter Page 19 of 28 Owner's Handbook (Part Code: Z40949)