Operation; Control Panel; How To Operate Your Scooter - Mercury Owner's Manual

4.1 CONTROL PANEL

Please see the diagram on the right.
1. Speed Dial
2. Horn Button
3. Wigwag Paddle
4. Key Ignition
5. Charger Socket
6. Battery Indicator
7. Power Eye

4.2 HOW TO OPERATE YOUR SCOOTER

Key Ignition
The key ignition acts as the power switch for the scooter. To switch the power on, turn the key clockwise
in the ignition. The power eye should illuminate.
To switch the power off, turn the key anticlockwise. The power eye should switch off and the key can be
removed if required.
Speed Dial
Turn the speed dial to determine the maximum speed of the scooter. Turn the dial clockwise to increase
the speed setting and turn the dial anticlockwise to decrease the speed setting.
Moving and Braking
Push the right-hand side of the wigwag paddle forwards with your right thumb and the scooter will move
forward.
Push the left-hand side of the wigwag paddle forward with your left thumb and the scooter will move
backward, emitting an audible reversing alarm.
To brake, release the wigwag paddle which will return to neutral and activate the electromagnetic brake
automatically. This will bring the scooter to a prompt stop.
The wigwag paddle allows you to control the speed of the scooter up to a maximum speed determined by
the Speed Dial. The further the wigwag paddle is deflected, the faster the scooter will go up to its
maximum speed of 4mph.
Horn Button
Press the horn button to sound the horn. Release the button to stop the horn
Mercury Prism Electric Scooter

4. OPERATION

Page 9 of 28
5 1 2
Owner's Handbook (Part Code: Z40949)
6
7
4
3