Using The Configuration Menu - D-Link DWL-7700AP User Manual

Section 3 - Configuration
To configure the DWL-7700AP, use a computer which is connected to the DWL-7700AP with an Ethernet cable (see the Network Layout
diagram).
First, disable the Access the Internet using a proxy server function. To disable this
function, go to Control Panel > Internet Options > Connections > LAN Settings
and uncheck the enable box.
Start your web browser program (Internet Explorer, Netscape Navigator).
Type the IP address and http port of the DWL-7700AP in the address field
(http://192.168.0.50) and press Enter. Make sure that the IP addresses of the
DWL-7700AP and your computer are in the same subnet.
After the connection is established, you will see the user identification window as
shown.
Note: If you have changed the default IP address assigned to the DWL-7700AP,
make sure to enter the correct IP address.
•
Type admin in the User Name field
•
Leave the Password field blank
•
Click OK
Note: If you have changed the password, make sure to enter the correct
password.
D-Link DWL-7700AP User Manual

Using the Configuration Menu

13