Dhcp Server > Static Pool Settings; D-Link Dwl-7700Ap User Manual - D-Link DWL-7700AP User Manual

Section 3 - Configuration
DHCP Server Static Configuration Protocol assigns IP
Control: addresses to wireless devices on the network.
This protocol simplifies network management
and allows new wireless devices to receive IP
addresses automatically without the need to
manually assign IP addresses.
Assigned IP: Select Enable to allow the DWL-7700AP to
function as a DHCP server.
Use the Static Pool Settings to assign the same
Assigned MAC
IP address to a device at every restart. The IP
Address:
addresses assigned in the Static Pool list must
NOT be in the same IP range as the Dynamic
Pool. After you have assigned a static IP address
to a device via its MAC address, click Apply; the
device will appear in the Assigned Static Pool at
the bottom of the screen. Edit or delete the device
in this list. Enter the MAC address of the device
here.
SubMask: Enter the subnet mask here.
Gateway: Enter the IP address of the gateway on the
network.
Wins:
Windows Internet Naming Service is a system
that determines the IP address of a network
computer with a dynamically assigned IP address,
if applicable.

D-Link DWL-7700AP User Manual

DHCP Server > Static Pool Settings
42