Packing - Hitachi C 10FSB Technical Data And Service Manual

10. PACKING

(1) Preparation before packing
Remove the dust bag from the main body. Turn
the turn table 57˚ clockwise and secure the side
handle. Push the guard back (Fig. 54).
(2) How to install packings (A) and (B)
Slide the head section toward the operator and
insert packing (B) between the slide pipe, hinge
and holder (A). Push the head back and secure
the slide in position with packing (B) inserted by
means of the 6-mm wing bolt. Place packing (A)
under the head and push the head down. Insert
the locking pin while pressing the packing (A) to
secure the head section in position (Fig. 55).
(3) How to install packing (C)
Insert packing (C) into the motor housing (Fig. 56).
Dust bag
Push the guard back.
Packing (B)
Packing (C)
--- 35 ---
Turn the turn
table 57˚
clockwise.
Side handle
Fig. 54
6-mm knob bolt
Packing (A)
Fig. 55
Housing
Fig. 56
Secure