Comparisons With Similar Products - Hitachi C 10FSB Technical Data And Service Manual

6. COMPARISONS WITH SIMILAR PRODUCTS

Maker/Model
Item
0˚ (Right angle)
Left/right
45˚
Miter
Right 57˚
(Hitachi)
Right 52˚
(C)
*
Max.
cutting
Left 45˚
dimen-
sions
Bevel
Height
Right 45˚
x Width
mm
(inch )
Miter right/left 45˚
+
Bevel left 45˚
Miter left 31˚
+
Bevel right 45˚
Miter right 45˚
+
Bevel right 45˚
Groove cutting width
Miter cutting ranges
Bevel cutting ranges
Compound (miter + left
bevel) cutting ranges
Angle stopper positions
Saw blade external diameter
mm (inch) (No. of teeth)
Laser marker
Laser output
Full-load current (A)
No-load revolution (min
Max. output (W)
Soft-start
Speed control
* These numeric values are for the models destined for the U.S.A. and Canada. Refer to "5. SPECIFICATIONS"
as the capacities are different depending on the destinations.
HITACHI
C 10FSH/C 10FSB
85 x 312 (3-11/32" x 12-9/32")
90 x 280 (3-9/16" x 11")
[with aux. board 15 (19/32")]
85 x 218 (3-11/32" x 8-19/32")
90 x 190 (3-9/16" x 7-1/2")
[with aux. board 15 (19/32")]
85 x 165 (3-11/32" x 6-1/2")
90 x 147 (3-9/16" x 5-25/32")
[with aux. board 10 (13/32")]
55 x 305 (2-3/16" x 12")
60 x 280 (2-3/8" x 11")
[with aux. board 15 (19/32")]
30 x 305 (1-3/16" x 12")
35 x 280 (1-3/8" x 11")
[with aux. board 15 (19/32")]
55 x 218 (2-3/16" x 8-19/32")
60 x 190 (2-3/8" x 7-1/2")
[with aux. board 15 (19/32")]
30 x 260 (1-3/16" x 10-7/32")
35 x 230 (1-3/8" x 9-19/32")
[with aux. board 15 (19/32")]
30 x 218 (1-3/16" x 8-19/32")
35 x 190 (1-3/8" x 7-1/2")
[with aux. board 15 (19/32")]
Possible
(with bolt height adjustment)
0˚ --- 45˚, r 0˚ --- 57˚
Left ight
0˚ --- 45˚
Left and right
Miter left and right: 0˚ --- 45˚
Bevel left: 0˚ --- 45˚
Miter left 0˚ --- 31˚ / Miter right
0˚ --- 45˚ Bevel right 0˚ --- 45˚
Left and right 0˚, 15˚, 22.5˚,
30˚ (for USA/CAN 31.6˚), 45˚
255 (10") (40 P)
262 (10") (60 P) (for AUS/NZL)
C 10FSH C 10FSB
Provided Not provided
1 mW
110 V -- - 12.1 A, 120 V -- - 12 A,
230 V -- - 6.6 A (for NZL),
230 V -- - 5.8 A,
240 V -- - 6.5 A (for AUS)
-1
) 3,800
1,400
Provided (electronic control)
Provided (electronic control)
HITACHI
C 10FS
85 x 312 (3-11/32" x 12-9/32")
90 x 295 (3-9/16" x 11-19/32")
85 x 220 (3-11/32" x 8-11/16")
90 x 215 (3-9/16" x 8-15/32")
85 x 180 (3-11/32" x 7-3/32")
90 x 165 (3-9/16" x 6-1/2")
[with aux. board 15 (19/32")]
55 x 305 (2-3/16" x 12")
60 x 295 (2-3/8" x 11-19/32")
30 x 305 (1-3/16" x 12")
35 x 295 (1-3/8" x 11-19/32")
55 x 220 (2-3/16" x 8-21/32")
60 x 215 (2-3/8" x 8-15/32")
30 x 255 (1-3/16" x 10-3/32")
35 x 250 (1-3/8" x 9-7/8")
30 x 220 (1-3/16" x 8-21/32")
35 x 215 (1-3/8" x 8-15/32")
Possible
(with bolt height adjustment)
0˚ --- 45˚, right 0˚ --- 57˚
Left
t and right 0˚ --- 45˚
Lef
Miter left and right: 0˚ --- 45˚
Bevel left:
Miter left 0˚ --- 31˚ / Miter right
0˚ --- 45˚ Bevel right 0˚ --- 45˚
Left and right 0˚, 15˚, 22.5˚,
31.6˚, 35.3˚, 45˚
255 (10") (40 P)
Not provided
--- ---
120 V -- - 12 A, 230 V -- - 6.6 A,
220 V -- - 6.3 A, 240 V -- - 6.5 A
3,800
1,400
Provided (electronic control)
Provided (electronic control)
--- 11 ---
91 x 305 (3-19/32" x 12")
91 x 216 (3-19/32" x 8-1/2")
91 x 185 (3-19/32" x 7-9/32")
50 x 305 (1-31/32" x 12")
31 x 305 (1-7/32" x 12")
50 x 216 (1-31/32" x 8-1/2")
31 x 260 (1-7/32" x 10-7/32")
31 x 216 (1-7/32" x 8-1/2")
Possible (with bolt height
adjustment in two steps)
0˚ --- 45˚, right 0˚ --- 57˚
Left
ight
Left and r
Miter left and right: 0˚ --- 45˚
Bevel left:
0˚ --- 45˚
Left and right 0˚, 15˚, 22.5˚,
31.6˚, 45˚
255 (10") (50 P)
Not provided
120 V -- - 13 A
3,700
Provided (electronic control)
Provided (electronic control)
C
0˚ --- 45˚
0˚ --- 45˚
---
---