Product Name; Marketing Objective; Applications; Selling Points - Hitachi C 10FSB Technical Data And Service Manual

1. PRODUCT NAME

Hitachi Slide Compound Saws, Models C 10FSH and C 10FSB

2. MARKETING OBJECTIVE

The new Models C 10FSH and C 10FSB slide compound saws are equipped with not only a fence that is higher
than that of the current Model C 10FS but also a sub fence that is higher than the fence to support the workpiece
widely for stable cutting. In addition, positive stoppers are provided to easily adjust the turn table position for miter
cutting. The Model C 10FSH is equipped with a laser marker for easier alignment with the ink line. These Models
C 10FSH and C 10FSB stay a step ahead of the competitors. Vigorous sales promotion is anticipated.

3. APPLICATIONS

Cutting various types of wood workpieces
Cutting workpieces of plywood, decoration panels, soft fiberboards and hard boards
Cutting aluminum sashes

4. SELLING POINTS

(9)
Right and left bevel cutting
*Bevel cutting dimensions
To left: H55 mm x W305 mm (H2-3/16" x W12")
H60 mm x W280 mm (H2-3/8" x W11")
To right: H30 mm x W305 mm (H1-3/16" x W12")
H35 mm x W280 mm (H1-3/8" x W11")
(6)
Slide cutting
H85 mm x W312 mm
(H3-11/32" X W12-9/32")
*
H90 mm x W280 mm
(H3-9/16" X W11")
(5)
High dust collecting
performance
(1)
Laser marker
For easier alignment
with the ink line
(Only Model C 10FSH)
(3)
High sub fence
90 mm (3-9/16") in height
(Note) Numerals in ( ) are identical with item numbers in
"4-1. Selling Point Descriptions".
* These numeric values are for the models destined for the U.S.A. and Canada. Refer to "5. SPECIFICATIONS" as the
capacities are different depending on the destinations.
(10)
(4)
(2)
Legible scale
--- 1 ---
Compound miter and left bevel cutting
*H55 mm x W218 mm (H2-3/16" x W8-19/32")
H60 mm x W190 mm (H2-3/8" x W7-1/2")
Positive angle stoppers
For easy adjustment of the turn table
position for miter cutting
(At the right and left of the 0˚ center setting,
at 15˚, 22.5˚, 30˚ (for USA, CAN: 31.6˚) and 45˚settings)
(12)
Minimized reaction
during motor start up
Electronically
controlled soft start
and motor torque
(7)
Press cutting
*H85 mm x W85 mm
(H3-11/32" x W3-11/32")
(11)
Splinter guard, also
serving for cut alignment
(8)
Miter cutting
[ Left 45˚, right 57˚]