Static Data Tab - Raymarine AIS500 User Manual

SRT Marine Technology

Static Data Tab

This tab shows the current configuration of the AIS Transceiver and allows the configuration to be programmed during
User guide
installation into a vessel.
©
SRT-MTB proAIS Application
When an un-configured AIS Transceiver is connected for the first time the display will be similar to that shown below:
Configuring the Transceiver
To configure the Transceiver all of the data fields must be completed and saved to the AIS.
CAUTION:
For security reasons the MMSI of the vessel cannot be changed once programmed. Do not programme the
MMSI unless you are certain you have the correct information. Please check the number entered carefully. If
the MMSI programmed is incorrect the AIS Transceiver will need to be returned to the supplier for factory
reset.
LD2342 V1.4 Page 9 of 22
9