Advertisement
The Energy Saver switch controls a heater designed to prevent moisture acoumulation
between the refrigerator and freezer door frame. During humid weather, moisture
collects on objects that are cooler than the surrounding air. This condensation can be
eliminated by applying a small amount of heat to the surface upon which the water
accumulates.
When the Energy Saver switch is on "Saves Energy", no heat is applied to the surface.
It is saving both energy and money. If humidity increases and condensation appears,
turn the Energy Saver switohto "Reduces Exterior Moisture". Be sure to turn the Energy
Saver switch back to "Saves Energy" as the humidity drops to save energy.
In areas of relatively high humidity, the Energy Saver Switch in the "Reduces
Exterior Moisture" position will minimize any collection of moisture on the outside
surface of the cabinet.
For efficient energy use:
1. Besure the refrigeratoris level and ventilation around thefront grille is not blocked,
2. Check door sealsoccasionally for leakage, Check at various places,top, bottom,
and sides.
3, Check the temperature;avoid unnecessarycold settings.
4, Keep the freezer near full capacity; less cold air is lost during door openings.
5. Let hot dishes cool before putting into refrigerator or freezer,
6, Cover liquids; if uncovered, the unit must work longer.
7, Clean refrigerator condenser coils at least twice a year.
Advertisement
