Tool Specifications - Bostitch N62FNB Operation And Maintenance Manual

All demensions in inches unless otherwise specified.
Description
Engine Type
Operation Pressure Range
Maximum Operation Pressure
Fastener Type
Fastener Gauge
Fastener Range
Magazine Capacity
Length
Width
Height
Weight
Operating Pressure:
70 to 120 p.s.i.g. (4.9 to 8.43 kg/cm
performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
Air Consumption:
The N62FNB requires 3.9 cubic feet per minute or C.F.M. (110.4 liters per minute or LT/MIN) of free air at 80PSI
(5.6 kg/cm 2 ) to operate at a rate of 100 fasteners per minute. To determine the appropriately sized air
compressor, take the actual rate at which the tool will be run and compare the required C.F.M. (LT/MIN) to the
compressors free air delivery (C.F.M./ LT/MIN) at 80 PSI (5.6 kg/cm
For example, if your fastener usage averages 30 fasteners per minute, you need 30% of the tools C.F.M.
required to operate the tool at the rate of 100 fasteners per minute. In this case, be sure that your air
compressor can deliver a minimum of 1.17 C.F.M. (33.1 LT/MIN) at 80 PSI (5.6 kg/cm
performance.
Tool Model
N62FNB
* Stainless steel fasteners also available 1-1/4", 2", and 2-1/2" . Visit www.BOSTITCH.com for further details.
NOTE:
BOSTITCH tools have been engineered to provide superior customer satisfaction and are designed to achieve
maximum perfomance when used with precision BOSTITICH fasteners engineered to the same exacting
standards. BOSTITCH cannot assume responsibility for product performance if our tools are used with
fasteners or accessories not meeting the specific requirements established for genuine BOSTITCH
fasteners and accessories.
N62FNB
FN15ga Angled Finish Nailer
Oil-Free
70-120 PSI (4.9 to 8.43kg/cm
120 PSI (8.43 kg/cm
FN15 Series
15 Gauge
1-1/4" – 2-1/2" (31mm – 63mm)
129
14-3/16" (360.3mm)
3-5/8" (92mm)
11-11/16" (296.8mm)
4.15 lbs. (1.8kg, Including fitting)
2 ). Select the operating pressure within in this range for best fastener
Fastener Type
Angled Finish Nails

TOOL SPECIFICATIONS

2
)
2 )
2
).
FASTENER SPECIFICATIONS
Fastener SKU
FN1520
FN1524
FN1528
FN1532
FN1536
FN1540
-5-
2
Gauge Length
15 1-1/4" (32mm)
15 1-1/2" (38mm)
15 1-3/4" (45mm)
15 2" (50mm)
15 2-1/4" (57mm)
15 2-1/2" (63mm)
) for optimum