Tool Specifications - Bostitch SMART POINT BTFP12233 Operation And Maintenance Manual

TOOL SPECIFICATIONS

All dimensions in inches unless otherwise specified.
Description
Engine Type
Operation Pressure Range
Maximum Operation Pressure
Fastener Type
Fastener Gauge
Fastener Range
Magazine Capacity
Length
Width
Height
Weight
Operating Pressure:
70 to 120 p.s.i.g. (4.9 to 8.43 kg/cm
performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
Air Consumption:
The BTFP12233 requires 1.15 cubic feet per minute or C.F.M. (32.6 liters per minute or LT/MIN) of free air
at 80PSI (5.6 kg/cm ) to operate at a rate of 60 fasteners per minute. To determine the appropriately sized
2
air compressor, take the actual rate at which the tool will be run and compare the required C.F.M. (LT/MIN)
to the compressors free air delivery (C.F.M./ LT/MIN) at 80 PSI (5.6 kg/cm
For example, if your fastener usage averages 30 fasteners per minute, you need 50% of the tools C.F.M.
required to operate the tool at the rate of 60 fasteners per minute. In this case, be sure that your air
compressor can deliver a minimum of 0.58 C.F.M. (16.4 LT/MIN) at 80 PSI(5.6 kg/cm
performance.
FASTENER SPECIFICATIONS
Tool Model
BTFP12233
* Stainless steel fasteners also available in certain sizes. Visit www.BOSTITCH.com for further details.
NOTE:
BOSTITCH tools have been engineered to provide superior customer satisfaction and are designed to achieve
maximum perfomance when used with precision BOSTITICH fasteners engineered to the same exacting
standards. BOSTITCH cannot assume responsibility for product performance if our tools are used with
fasteners or accessories not meeting the specific requirements established for genuine BOSTITCH
fasteners and accessories.
18 GA Brad Nailer
70-120 PSI (4.9 to 8.43kg/cm
120 PSI (8.43 kg/cm
5/8" - 2-1/8" (15mm-55mm)
). Select the operating pressure within in this range for best fastener
2
Fastener Type Fastener SKU
Brads
BTFP12233
Oil-Free
)
2
BT13XX Series
18 Gauge
100
11.3" (287mm)
3.2" (81mm)
9.5" (241mm)
3.1lbs. (1.4kg)
Crown Width
BT1300 N/A
BT1303
N/A
BT1309 N/A
BT1332
N/A
BT1338
N/A
BT1340 N/A
BT1345
N/A
BT1350 N/A
-6-
)
2
).
2
) for optimum
2
Gauge
18
18
18
18
18
18
18
18
Length
5/8"(15mm)
3/4" (19mm)
1" (25mm)
1-1/4" (32mm)
1-1/2" (38mm)
1-9/16" (40mm)
1-3/4" (45mm)
2" (50mm)