Using the Serial Insert Path
The serial insert FX path routing allow you to send the same mono channel thru both the left and
right sides of a stereo effect. You can then use the parameters of both sides for more precise
effecting of the original mono signal.
ACTION: Use the Serial Insert Path to Create an 8 Band
Parametric EQ
1.
Hold SHIFT and press EFFECT-1 [CH EDIT button 7].
2.
Press the CH EDIT button that corresponds to the track/input that you want to EQ.
3.
Use the TIME/VALUE dial to select "InsertS."
4.
Press EFFECT (under EDIT CONDITION) until "EFFECT-1 PRM?" is displayed.
5.
Use the TIME/VALUE dial to select "B93=ParametricEQ" and press YES/ENTER.
6.
Use the PARAMETER buttons and the TIME/VALUE dial to adjust the EQ settings
for Input A and B. The signal will be processed by the Input A settings before being
routed to Input B. This, in essence, creates an 8-band parametric EQ.
This procedure requires a mono signal. Make sure that Channel Link is set
to Off for the designated channel.
Chapter 3: Recording Applications
67