Process Entire Mix With Internal Eq And Compressor - Roland VXpanded VS-880 Application Manual

Process Entire Mix With Internal EQ And Compressor

On some occasions you might already have a really good mix set up in your VS-880, but you find that you
would like to add a little more low frequency boost to the overall mix. In addition, you might want to
compress the dynamic range so your song will sound "louder" when played in your auto cassette player.
You will need to set up a normal mix situation, then assign the stereo mix to the effects device, choose the
EQ and Compressor, then record your final mix.
ACTION: Process Your Entire Mix With Internal EQ And
Compressor
1. Select INPUT>TRACK mode on the VS-880.
2. Press [EDIT] (above the Master Fader) until "MST EFF1 INS Sw=" is displayed.
3. Use the TIME/VALUE dial to select On.
4. Press [EFFECT] (under EDIT CONDITION section) until "EFF EFFECT-1 PRM?" is
displayed.
5. Press [YES].
6. Use the TIME/VALUE dial to select "EF1 A66=CL:Comp."
7. Use the left/right [<<PARAMETER>>] buttons and the TIME/VALUE dial to adjust the
compressor settings.
8. Return the VS-880 to the beginning of the song and press [PLAY]. All tracks will be routed
to the compressor and then to the mix buss to be recorded on your mastering device. Any
level or EQ changes will be recorded as well.
102
VS-880 Application Guide