[Parameter] Buttons; [Cursor] Buttons; [Yes] / [No] Buttons; Time/Value Dial - Roland VXpanded VS-880 Application Manual

[PARAMETER] Buttons

Use the [PARAMETER] buttons to change screens (pages) in the LCD display.
For example, you would use the [PARAMETER] buttons to move through the different screen displays
used during the editing process.

[CURSOR] Buttons

Use the [CURSOR] buttons to navigate around the inside of a single screen display.
For example, use the [CURSOR] buttons to move from one value setting to another inside the same screen.
The [CURSOR] buttons are also used as the [YES] / [NO] buttons.

[YES] / [NO] Buttons

The [YES] button is also used to answer YES whenever the VS-880 displays a question in the LCD.
Alternately, the [NO] button signals a NO response. For example, anytime the VS-880 display asks you a
question (i.e. when you see a ?), you must press the [YES] button to continue forward or press the [NO]
button to return to the previous command.

TIME/VALUE Dial

The [TIME/VALUE] dial is used for to two separate functions.
A: To change the actual value of a selected (highlighted) setting in the LCD screen display.
B: To move forward or backward in time, through the recording.
Use the cursor buttons to change the selected value of each click of the TIME/
VALUE dial (see editing resolution - Application Guide page 29).
Chapter 2: Understanding Your VS-880
33