Before You Call For Service - Jenn-Air JGR8855 User Manual

Before You Call for Service
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Oven will not self-clean.
• Check to make sure controls are set properly.
• Check to make sure the cycle is not set for a delayed start.
• Check if door is closed.
Oven did not clean properly.
• Longer cleaning time may be needed.
• Excessive spillovers, especially sugary and or acid foods,
were not removed prior to the self-clean cycle.
Oven door will not open after self-clean cycle.
• Oven interior is still hot. Allow about one hour for the
oven to cool after the completion ofa self--c]ean cycle. The
door can be opened when the LOCK indicator word is not
displayed.
Moisture condensation on oven window.
• This is normal when cooking food high in moisture.
Excessive moisture was used when cleaning the window.
Strong odor when oven is turned on.
• This is normal for a new range and will disappear after a
few uses. Initiating a clean cycle will "bum off" the smells
more quickly.
• Excessive food soils on the oven bottom. Use a self-clean
cycle.
"F" plus a number appears in display.
# This is called a fault code. If a fault code appears in the
display and beeps sound, press the Stop/Clear pad. If the
fault code and beeps continue, disconnect power to the
appliance and call an authorized servicer.