Select Password - Ericsson DT290 User Manual

Security
#*72*
# . i
, |
64

Select password

You can use your four-digit password for blocking your phone from
unauthorized use, for making external calls from any blocked
extension, for entering the message system or when you are using
the DISA function.
Note: The first time you enter the message system you
might be requested to change your password if it is default
(0000). This procedure is performed directly in the message
system. See section
Dial to select a new password
Z
Dial your present password
The default password is 0000.
*
Press
Z
Dial your new password
Press
Verification tone.
Wait for the call icon to stop flashing
Press to finish the procedure
"Internal Messages" on page
BusinessPhone – Cordless phone DT290
37.