Check And Store Received Messages - Ericsson DT290 User Manual

B
*59# . i
, |
BusinessPhone – Cordless phone DT290

Check and Store Received Messages

A received message is indicated with a message icon (envelope) in
the display (a special dial tone can also be used to indicate a
waiting message, if programmed). In addition you can see the
number of queued messages in the display.
Received messages are divided into following three categories:
• New messages (not heard)
• Heard messages
• Stored messages
Voice messages can also be forwarded to other mailbox numbers
(individual or common), see section
page 40.
Note: Messages are deleted from the system after a certain
time. The time depends on which category the message
belongs to. Please ask your system administrator regarding
this.
Press to enter the message system
or
Dial and press
Note: It is possible to program a number or function on the
R/Message key, if this is done, the default function to enter
your message system directly does not work any more. If
you want to use the Message Waiting function (default)
again, the number to enter the message system has to be
re-entered. See section
function on the R/Message
You can check and store your received messages. Up to
20 messages can be stored. Voice messages will be heard. Call
me messages will call the sender automatically (these messages
cannot be stored).
Note: Depending on the configuration, you might be asked
for your password before you can retrieve your messages.
See section "Security" on page
Press to finish the procedure
"Forward a Voice
"Programming a number or
key" on page 50.
63.
Internal Messages
Message" on
39