Ericsson DT290 User Manual page 30

Call Forwarding
*22*
0 Z
# . i
, |
#22# . i
, |
*22*# . i
, |
30
Program and activate a new external diversion address
To set a new individual external diversion address:
Dial
Dial the digit(s) for external call access and enter the new
external diversion address
A maximum of 24 digits.
Note: If your public network requires waiting for a second
dial tone, press
Press
Verification tone.
Wait for the call icon to stop flashing
Press to finish the procedure
Note: Individual External Diversion can also be used via the
DISA function, see section
page 55.
Cancel External Diversion
Dial and press
Wait for the call icon to stop flashing
Press to finish the procedure
Note: The programmed diversion address is not removed
from the memory, the Diversion is just inactive.
Re-activate External Diversion
Divert your calls to an external position.
Dial and press
Wait for the call icon to stop flashing
Press to finish the procedure
You can make outgoing calls as usual. A special dial tone reminds
you that Call forwarding is active. The display shows that you have
activated an External Diversion.
*
.
"Other Useful
BusinessPhone – Cordless phone DT290
Facilities" on