For Your Safety Read Before Lighting - Vermont Castings DFS3224A Installation And Operating Instructions Manual

FOR YOUR SAFETY READ BEFORE LIGHTING

A. This appliance is equipped with an ignition device which automatically lights the pilot. Do not try
to light the unit by hand.
B. BEFORE OPERATING smell all around the appliance area for gas. Be sure to smell next to the fl oor
because some gas is heavier than air and will settle on the fl oor.
WHAT TO DO IF YOU SMELL GAS:
• Do not attempt to light any appliance.
• Do not touch any electric switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.
• If you cannot reach your gas supplier, call the fi re department.
C. Use only your hand to push in, or turn the gas control knob. Never use tools. If the knob will not push
in or turn by hand, don't try to repair it. Call a qualifi ed service technician. Force or attempted repair
may result in a fi re or explosion.
D. Do not use this appliance if any part of it has been under water. Immediately call a qualifi ed service
technician to inspect the appliance and to replace any part of the control system and any gas control
that has been under water.
Control Knobs
Figure 30 - Location of Piezo Ignitor, Control Knobs and Switch on Milli-Volt Unit,
26D3310
If you do not follow these instruction
exactly, a fi re or explosion may result
causing property damage, personal
injury or loss of life.
On/Off Switch
Piezo
Ignitor
Optional
T-Stat Sensor
Hi/Lo Remote Unit and Manual Unit
OPERATING INSTRUCTIONS
Optional
Blower
25