Strip Circuit - Jenn-Air W10394706A User Manual

Complete Installation
1. Refer to the "Make Gas Connection" section for properly
connecting the cooktop to the gas supply.
2. Refer to the "Electronic Ignition System" section for proper
burner ignition, operation, and burner flame adjustments.
IMPORTANT: You may have to adjust the "LO" setting for
each cooktop burner.
Griddle 120V Control Wiring Diagram To Cooktop Stand-Alone
14

STRIP CIRCUIT

R P2-1
Rotary Control
W P2-6
Checking for proper cooktop burner flame is very important.
The small inner cone should have a very distinct blue flame
¼" (0.64 cm) to ½" (1.3 cm) long. The outer cone is not as
distinct as the inner cone. LP gas flames have a slightly
yellow tip.
3. Refer to "Complete Installation" in the "Installation
Instructions" section of this manual to complete this
procedure.
1320W/120V
OR/W
P1-1
BU
W
P1-3
RTD
V W W
P1-4
P1-6 OR/W
OR/W
Lamp 120V
W
W
V V