Honeywell UtilityPRO Series Operating Manual page 5

This thermostat is ready to go!
Your new thermostat is pre-programmed and ready to go. Just set the time and day.
Then check the settings below and change if needed:
1. Set clock ......................................................................................................................See page 10
2. Select fan setting: Preset to Auto ...........................................................................See page 11
3. Select system setting: Preset to Heat ..................................................................See page 12
4. Program schedules: Preset to energy-saving levels
while you're at work or asleep (assumes you
wake at 6 am, leave at 8 am, return at 6 pm
and go to bed at 10 pm) .......................................................................................... See pages 16-17
ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time,
and manually adjust the temperature (see pages 14-15).
3
UtilityPRO Series
TM
69-2539EFS—01