Fan Settings - Honeywell UtilityPRO Series Operating Manual

Fan Settings

UtilityPro Getting Started Features
®
Press FAN
Note: If a fan schedule is programmed,
"Auto" runs the fan schedule.
SUN
AM
USAGE
Press FAN to select fan operation, then press
DONE.
• ON: Fan is always on.
• Auto: Fan runs only when the heating
or cooling system is ON.
• Circ: Fan runs randomly, about 35%
of the time, not counting any run time
with the heating or cooling system.
You can press FAN to override the fan settings
you've programmed for different time periods.
If you select ON or Circ, the setting you select
remains active until you press FAN again to
MCR32579
select Auto.
11
UtilityPRO Series
TM
69-2539EFS—01