Jenn-Air JMW8527DA Series Service Manual page 43

Installation Instructions
Notes:
1. 1 1/4" diameter conduit access hole (hole must be cut as close to corner of cabinet as possible).
2. 5/8" plywood floor (must support 275 lbs.)
3. Do not block air intake slots along bottom of oven.
Electrical Requirements: Provide for 120/240 or 120/208 VAC, 60 Hz. See serial plate on front of unit for power requirements.
Important: Because of continuing product improvements, Jenn-Air reserves the right to change specifications without
notice. Dimensional specifications are provided for planning purposes only. For complete details see installation
instructions that accompany each product before selecting cabinetry, making cutouts or beginning installation.
©2004 Maytag Appliances Company
A 30 minimum
B 24 minimum
C 51 7/8 ± 1/16
D 24 minimum
E 28 1/2 ± 1/16
F 52 15/16
G
H 25 7/16
3
I
16022821 Rev. 0
Dimensions
Inches Centimeters
76.2 minimum
61.0 minimum
131.8 ± .2
61.0 minimum
72.4 ± .2
134.5
29 3/4
4 - 10 10.2 - 25.4
75.6
64.6
A – 5