Accessing The Management Interface - SonicWALL TZ 100 Series Getting Started Manual

Accessing the Management Interface

The computer you use to manage the SonicWALL TZ 100/200
series appliance must be set up to connect using DHCP, or with
a static IP address in your chosen subnet. The default subnet
for LAN zone ports is 192.168.168.x.
If your SonicWALL TZ 100/200 series appliance required a
reboot after completing the Setup Wizard, wait until the
is no longer lit before continuing.
To access the SonicOS Web-based management interface:
1. Enter the default IP address of http://192.168.168.168, or
the LAN IP address you chose during the Setup Wizard, in
the Location or Address field of your Web browser.
Tip:
If you changed the LAN IP of your SonicWALL during
the Setup Wizard, you may need to restart your
computer for changes to take effect.
2. When the SonicWALL Management Login page displays,
enter your username and password (default values are
"admin" for user name and "password" for password).
If the System > Status page (shown below) displays, then you
have correctly configured the SonicWALL TZ 100/200 series
appliance to work with the computer on your LAN.
LED
SonicWALL TZ 100/200 Series Getting Started Guide Page 5