Step 4: "Accessing The Sonicwall Tz 170 Management Interface - SonicWALL TZ 170 SP Quick Start Manual

Accessing the SonicWALL TZ 170 Management Interface
4
Once you have configured your Management Station, you can access the SonicWALL TZ 170
Management Interface to access the SonicWALL Setup Wizard to automate the setup of the
SonicWALL security appliance in your network environment. In most cases, the procedures in the
Setup Wizard completes your network to Internet connectivity configuration.
Launching the Setup Wizard
To access the TZ 170 Management Interface and launch the Setup Wizard from your Management
Station, follow the instructions below:
1. Launch your Web browser.
Alert! Because you are temporarily disconnected from the Internet, you may receive an error message
when your Web browser first opens. This does not affect your installation process. Continue with the steps
below.
2. Enter 192.168.168.168 in the Location or Address field and press Enter.
Alert! Your Web browser must support Java and HTTP uploads in order to fully manage the SonicWALL
security appliance. Internet Explorer 5.0 or higher, as well as Netscape Navigator 4.0 or higher, are
recommended.
3. The SonicWALL Setup Wizard launches and guides you through the configuration and setup of your TZ 170.
Can't Connect?
If you cannot connect to the SonicWALL TZ 170, check the following:
• Did you correctly enter the SonicWALL TZ 170 LAN IP address in your Web browser?
• Is the SonicWALL TZ 170 connected to the same network as your computer?
• Have you changed the TCP/IP network settings on your computer?
• Do you have the crossover cable connected to your Management Station and the SonicWALL TZ 170.
SonicWALL TZ 170 SP/SonicWALL TZ 170 Wireless Quick Start Guide Page 11