Shutting Down From The Cli - Motorola WS5100 Series Installation Manual

5-2 WS5100 Series Switch Installation Guide

5.2 Shutting Down From the CLI

To shut down the WS5100 from the CLI, issue a halt command.
WS5100#halt
Wireless switch will be halted, do you want to continue?
(y/n):y
The system is going down NOW !!
% Connection is closed by administrator!
WIOS_SECURITYMGR[395]: DNSALG: Shutting down.
WIOS_SECURITYMGR[395]: FTPALG: Shutting down.
The system is halted.
NOTE: The WS5100 will power off after issuing a halt command through
a software toggle of the power supply. Be sure to flip the power switch to
the Off position. If the power cord is removed and reinstalled, or power is
lost and restored, the switch will power back on.