1-2
WS5100 Series Switch Installation Guide
1.2 Document Conventions
The following graphical alerts are used in this document to indicate notable situations:
!
1.3 Warnings
• Read all installation instructions and site survey reports. Verify correct equipment
installation before connecting the system to its power source.
• Remove jewelry and watches before installing this equipment.
• Install the equipment in a rack with adequate dimensions and weight allowances.
• Verify the rack is anchored and cannot tip over or break away from its mountings.
• Verify the unit is grounded before connecting it to the power source.
• Verify any device connected to this unit is properly wired and grounded.
• Connect all power cords to a properly wired and grounded electrical circuit.
• Verify the electrical circuits have appropriate overload protection.
• Attach only approved power cords to the device.
• Motorola strongly recommends the use of an Uninterruptible Power Supply (UPS) that
supports the WS5100 power rating. Not using a UPS can result in data loss or
equipment damage due to a power surge or power failure.
NOTE: Tips, hints, or special requirements that you should take note of.
CAUTION: Care is required. Disregarding a caution can result in data loss
or equipment malfunction.
WARNING! Indicates a condition or procedure that could result in
personal injury or equipment damage.