Mitsubishi Electric WD-52627 Service Manual page 51

MODELS: WD-52627 / 52628 / 62627 / 62628 / 62827 / 62927 / 73727 / 73827 / 73927
Locking Screws (continued)
• In 73" models, loosen the 4 screws [C] in the Joining Bracket. (Figure 3)
• Remove the rubber wedge shown in
ADJUSTMENT PROCEDURES
Adjustment Locations
The Mechanical Adjustements are accessed
though the opening for the Card Reader.
Locations of the Adjustmentts are shown
below.
CAUTION: Do Not force an adjust-
ment past the end of it's range,
UNIT-ADJUSTER damage may
result.
[C]
Figure 3: Joining Bracket Lock Screws
Figure 4: Rubber Wedge
[A-1]
Page 50
[C]
WEDGE
[B-1]
Figure 4: Adjustment Locations
[A-2]
[A-3]