MODELS: WD-52627 / 52628 / 62627 / 62628 / 62827 / 62927 / 73727 / 73827 / 73927
OPERATING CHASSIS OUTSIDE OF CABINET
1) Remove screws from back terminal board.
Screws A = (7), B = (2), C = (2)
B
C
3) Support bracket has latch that must be opened
before removing from unit
latch
5) Disconnect AC cord from connector PS and
disconnect connector CE1
A
support bracket
CE1
PS
Page 26
2) Remove support bracket screws D = (4), and
mounting screw E = (1)
E
4) Remove mounting screw F = (1) on right side
of chassis behind bracket
F
6) Pull chassis from cabinet. Rotate to side as
pictured below and remove screws G = (2)
G
D