Comtech EF Data SLM-5650A Installation And Operation Manual page 102

SLM-5650A Satellite Modem
Front Panel Operation
CONFIG: Rx
CnC Acquisition: Range: 60.000 KHz
First, use the arrow keys to select Range or Reacq, and then press [ENT]. Then, use Method
1 or Method 2 to configure these options:
Method Procedure
1 Key in the desired value using the numbered keypad. Press [ENT] when done
Select the digit to be edited using the  arrow keys, and then change the value of that digit by
2
using the  arrow keys. Press [ENT] when done.
Note the following:
Option Settings
Range
CnC Interfering Carrier Frequency Offset Search Range: 0
Reacq
Holdoff time before the demodulator starts a new search.
CONFIG: Rx
CnC Search Delay:
First, use the arrow keys to select Min or Max, and then press [ENT]. Then, use Method 1 or
Method 2 to configure these options:
Method Procedure
1 Key in the desired value using the numbered keypad. Press [ENT] when done
2
Select the digit to be edited using the  arrow keys, and then change the value of that digit by
using the  arrow keys. Press [ENT] when done.
Note the following:
Option Settings
Min
Minimum Delay value to use when searching for the Interfering Carrier.
Max Maximum Delay value to use when searching for the Interfering Carrier.
CnC Acquisition
 
Reacq: 120 Sec
CnC SearchDelay
 
Min: 000 mSec
Max: 290 mSec
5–20
(E)
60 kHz (in 1 Hz steps).
–
(E)
Revision 8
MN-SLM5650A