Comtech EF Data SLM-5650A Installation And Operation Manual page 101

SLM-5650A Satellite Modem
Front Panel Operation
CONFIG: Rx
Rx Clock Phase: Normal
First, use the arrow keys to select Rx Clock Phase or Data Phase, and then press
[ENT]. Then, for either, use the  arrow keys to select Normal or Invert. Press
[ENT] when done.
CONFIG: Rx
BPSK Bit Ordering: Standard
Use the arrow keys to select BPSK Bit Ordering (for BSPK compatibility) as
Standard or Non-Standard, and then press [ENT].
CONFIG: Tx
Eb/No Threshold: 00.1 dB
Use the  arrow keys to select a digit to edit, and then use the  arrow keys to edit
the value of that digit. This sets an Eb/No threshold such that, when the received carrier
Eb/No is less than the set value, the Rx threshold alarm is set. The valid range is 0.1–20 dB
(in 0.1 dB steps). Press [ENT] when done.
CONFIG: Rx
Carrier-in-Carrier(CnC):
Use the arrow keys to select Mode, Acquisition, or SearchDelay, and then press [ENT]. If
Mode is selected, use the  arrow keys to select either On or Off. Press [ENT] when done.
Misc Clk/DataPhase
 
Data Phase: Normal
Misc BitOrdering
 
Misc Eb/No Threshold
 
CnC

Acquisition
(E)
Non-Standard
(E)
Mode:Off
SearchDelay (E)
5–19
Revision 8
MN-SLM5650A
(E)