Clock Controls; Time Of Day Clock; To Set Time Of Day - Jenn-Air EXPRESSIONS W30400 Use And Care Manual

When electrical power is supplied or after power interruption, the last clock time
displayed before power was interrupted will flash. Time will advance and continue to
flash until clock is reset.
BASI_ INS_UCTiONS
12;To_haP_PNate::
number PadS: I
To setTime ofDay
I,Touch ClockPad.
Indicatorword TIME will flash and time digits will appear in the Display. (If more
than five seconds elapse between touching Clock Pad and touching a number
pad, the Clock Pad must be touched again in order to set clock.)
2. Touch the appropriate number pads until correct time of day appears in Display.
Note: Five seconds after touching the number pads, the time of day will
automatically be entered.
IMPORTANT
• To recalltime of day when another time function is showing: Touch Clock Pad.
• Clock time cannot be changed when oven has been programmed for Timed
Bake, Timed Convect Bake, Timed Convect Roastor Self-clean. Cancel program
before reprogramming clock.
10